BB110 0

Our Smallest Pilot Tube Microtunnelling Machine

 

The B110 microtunnelling machine has been designed to pass through a standard household door in order for the drill to be carried through doorways in order to drill in backyards of properties where access may otherwise be difficult.

This unit is 2.25m (89") long and only 0.6m (24") wide.  This allows access into those confined spaces where the conventional rigs can't go.  The machine and power pack have been specifically designed to negotiated through a standard household door for access in those otherwise inaccessible places.

 

Maximum accuracy

The B110 microtunneller is specifically set up to install 150mm (6") and 225mm (9") diameter sewer and drainage pipe to grade and line.  Bore length in excess of 30 m (90') and grades of 1 in 200 have been achieved with this unit in depth to 4m (13 ft) below ground level.

 

A multipurpose microtunnelling machine

The bed-borer can also be configured as a directional drill rig and can also be fitted with an air hammer to drill through solid rock for non grade holes.

 

The perfect machine for plumbers and drainage contractors who commonly install sewerage and drainage lines in urban and built up areas. The B110 microtunneller is a simple yet robust machine which makes the trenchless installation of underground an affordable solution for plumbers and drainers any where.

 

B110 microtunnelling SPECIFICATION

Torque:
1,400 Nm (1033 lbft)
Thrust:
11T (24,250 lb)
Pullout:
6T (13,230 lb)
Dimension:
2100mm L x 750mm W x 1200mm H
Mass:
200 Kg (440 lb)
Tooling:
20 m of 70 mm (66' of 23/4") Pilot Rod System
20 m of 100 mm (66' of 4") Auger System
1 x 150 mm (6") Cutting Head
Guidance System:
Electronic Theodolite
Power Source:
Remote, Kohler 25 Hp petrol engine
19 kW (25 Hp) at 3600 rpm
70Lpm (19GPM) at 2000 PSI
Notes:
The machine is supplied complete for installation of 20m bores